How to Clean A Ninja Coffee Maker


Table of Content

Best Way to Clean a Ninja Coffee Bar

If you love your morning cup of joe, then you probably don’t want to spend too much time cleaning your coffee maker. After all, who wants to spend their day scrubbing out the inside of their appliance?

The answer depends on the type of coffee maker you have. Some models require less maintenance than others. For example, some machines come with built-in filters, while others require you to purchase them separately.

If you have a Ninja Coffee Bar it’s important to know how to clean it so you can take care of it immediately after you’re done. That way you’ll keep it running properly for a long time to come.

Hi, This is Aliza Arzoo, In this article, I will share “How to Clean a Coffee Maker/Coffee Bar. If you wanted to know then read this article carefully


What You Will Need

Your coffee bar already has most of the pieces you need when cleaning it. This includes hot water, which is going to do most of the cleaning for you.

1st. Clean the Ninja Coffee Maker with White Vinegar


Step 1: Vinegar is known as a substance that can help us to dissolve and clean some deposits on our coffee maker. Therefore, it is important for you to make sure that you have it at home. Do not let your coffee maker full of deposit and cannot brew the coffee well.

Step 2: The first thing you should do is to prepare a vinegar mixture. The mixture depends on the calcium that you have in your coffee maker. It means, if you see that there are alt of deposits there, you can add more vinegar. However, some coffee makers prefer to use a ratio of 1:1.

Step 3: The next step is to clean the machine with water. Before you use the vinegar to dissolve the deposit, it is better for you to clean it with some water. After using the coffee maker, pour some water into the reservoir and run the machine. This can help you to get rid of the debris from the previous brewing activity.

Step 4: Then, after you clean it with water, you can pour the vinegar mixture that you have made before. In this session, you have to make sure that you pour it up to the maximum fill line. Then, press the brew button.

Step 5: After 1-2 minutes, turn the machine off, and let the mixture still inside the coffee maker for about 30 minutes. It will help you to destroy the calcium deposit in the coffee maker. After 30 minutes, turn the machine on again without removing the mixture. Do it in 1-2 minutes again after that, you can pour out the mixture. The last step is to rinse out the vinegar. You should use water to get rid of the vinegar smell.

2nd. Using Lemon Mixture


Usually, people tend to use white vinegar to clean their coffee maker. However, there is still another way to do it. Using lemon juice can also help you to clean the calcium deposits in your coffee maker. There are some simple steps to do it.

Step 1: The first thing you must do is to make lemon juice. You have to squeeze the lemons and then mix them with some water. The best ratio for the solution is also 1:1. Make sure that you get the correct ratio to make the cleaning process run well.

Step 2: Before you use the lemon juice to clean the coffee maker, make sure that you have cleaned the debris from the previous brewing process. Use some water to do it. After that, you can pour the lemon juice mixture into the coffee maker up to the maximum line. Then, turn on the machine for about 1 minute. After you do it, let the mixture still in the machine for about 20-30 minutes.,

Step 3: After letting the lemon juice soak the coffee maker, remove the solution and also the old filter. Then, rinse the machine with some clean water. You can do it a couple of times until you are sure that you have got rid of the lemon smell.

3rd. Using Hot Water and Soap


Perhaps, this will be one of the simplest ways to clean your coffee maker. You only need soap and some hot water to get rid of the dirt in your coffee maker. However, you can only do it if you are sure that the machine is not too dirty or there are only a little calcium deposits in it.

Step 1: You can start the process by removing the brew basket and also the pot. This can help you clean the coffee maker easily.

Step 2: It is better for you to use the top rack of the dishwasher from the cleaning since the glass carafe is dishwasher safe. However, it is only on its safer side.

Step 3: Then, wipe down the outside part of the machine from the remaining coffee by using a cotton cloth that has been added some hot water and soap.

In this process, you should make sure that the soap residues are not on the machine.

4th. Washing the Coffee Maker Parts

Washing the Coffee Maker Parts

There is also a way that you can do it whenever you finish brewing the coffee. You can wash the parts of the coffee maker. Here are the steps that you need to do:

Step 1: First, of course, unplug the coffee maker from the power source. It is important to let it cool down before you clean and what the coffee maker parts.

Step 2: Then, remove some parts that you can wash. Do not forget to remove the filter and also take out the brew basket.

Step 3: The next step is to clean inside the carafe by using a soft cloth or bottlebrush. After you do all of these steps, you can wipe the machine

Step 4: Those simple ways can help you to keep your Ninja Coffee Maker clean. There will be no calcium deposit that can damage the freshness of your coffee. By doing those steps, you can make sure that you can get fresh coffee after the brewing process. Those ways also can make the coffee maker durable. You do not need to buy the new one in the near future if you can maintain the machine well.

Step 5: In addition, to clean the coffee maker, you have to make sure that all materials you need are in the correct ratio. Besides, you also have to pay attention to all parts of the machine. Do not forget to follow the chronological steps so that you can get the best result of cleaning your Ninja Coffee Maker.

5th. How to Clean Ninja Coffee Bar With a Descaling Solution


Next, let’s get stuck into how to clean your Ninja Coffee Bar using a descaling solution. There are a number of different options available, both on Amazon and in your local supermarket. Using a descaling solution to clean your machine is very similar to using vinegar. The only difference may be the solution to water ratio you’ll use. Follow the instructions that came with your descaling solution.

Step 1: Get the Ninja ready Make sure the water tank, the filter basket, and the carafe are clean and empty.

Step 2: Add the descaling solution Follow the instructions on the bottle or packet of the solution you are using. Add the appropriate amount of water to the water tank. Be sure not to fill over the maximum waterline. Place the carafe under the coffee outlet.

Step 3: Run the clean cycle Press the clean button on the Ninja. Let the machine begin the cycle, and after around 1 minute, press the clean button once again. This will cause the cleaning cycle. In the beginning, then pausing the cleaning cycle, we will have pulled some of the solutions into the internal pipes of the machine. We’ll now leave the Ninja to sit just like this for 30 minutes. This will allow the solution time to really clean everything nicely.

Step 4: Continue the clean cycle after 30 minutes, return to the machine and press the clean button. The clean cycle will continue to run and the remaining descaling solution will work its way through the machine and into the carafe.

Step 5: Begin the rinse cycle Once the cleaning cycle has finished, discard the solution from the carafe and thoroughly rinse it, along with the water tank and the filter basket.

Step 6: Rinse cycle Place the carafe back under the coffee outlet, and the filter basket into place. Fill the water tank with clean water. Press the clean button once again. This time, let the cycle run through fully. Discard the rinse water from the carafe. We’re going to do this rinse cycle 2 times. This will thoroughly remove any traces of the cleaning solution and will leave your Ninja Brew Bar clean as a whistle!

FAQ's About Cleaning the Ninja Coffee Bar

Q: How much vinegar do I use to clean my Ninja coffee maker?

Ans: We can use the travel mug indicator line on the water tank to help us use the perfect amount of vinegar to descale the Ninja Coffee Bar. Filing the water tank up to the travel mug marker with vinegar will equal about 16OZ of vinegar. Then fill to the top with water and you’re ready to start cleaning.

Q: Can I clean and descale my coffee maker using lemon juice?

Ans: While some people do like to use lemon juice to clean their coffee maker, there is one main reason why lemon juice isn’t the best thing to use. Lemons are super acidic on the tongue, but when it comes to descaling, lemon juice isn’t quite acidic enough. It lacks the power to really remove all of the minerals that we need to remove when descaling.

Q: Why does the clean light keep coming on my Ninja coffee bar?

Ans: This generally means you need to clean your Ninja. If you fully follow the instructions above and pay attention to the 30 minutes of soaking time, the clean indicator should go away. If it doesn’t, try going through the steps a few times over. Coffee makers that have never been cleaned before may take two or three rounds of cleaning with a descaling solution to fully remove all of the mineral build-ups.

Q: How often should you clean your Ninja coffee bar?

Ans: A regular clean should be done after every use of the machine. A deep clean, which includes descaling, should be done either once every two months, or when the clean light illuminates, whichever comes first.

Q: How do you know when the Ninja bar needs cleaning?

Ans: The Ninja Coffee Bar has a super handy function that tells you when it needs to be cleaned. Once you see the ‘clean’ button illuminated, this is when you know it’s time to run a deep clean.

Q: Is the Ninja Coffee Bar dishwasher-safe?

Ans: Removable parts of the coffee maker, such as the glass carafe and the water tank are dishwasher safe on the top rack only. Note that the thermal carafe and brew basket are not dishwasher safe and should be washed by hand using dish soap and water.

Q: How often should you descale your Ninja Coffee Bar?

Ans: A good rule is to plan on descaling your machine once every two months. Don’t wait for the ‘clean’ button to illuminate. The ‘clean’ light may come on before two months, in which case you should clean earlier.

Q: How to clean the individual Ninja Coffee Bar parts?

Ans: The water tank, along with other removable plastic parts can either be washed by hand using dish soap and water or washed in the dishwasher on the top rack. The filter basket and the thermal carafe are hands wash only.


Making really tasty coffee relies on three things: good coffee, good water, and clean brewing equipment. If you’re going to make the investment of a good coffee maker, and buy high-quality coffee to brew in it, keeping the machine clean will mean you’ll be getting exactly what you paid for, for the lifetime of the coffee maker.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 8

No votes so far! Be the first to rate this post.

2 thoughts on “How to Clean A Ninja Coffee Maker”

  1. 5 stars
    Hi there. I discovered your website via Google at the same time as searching for a related matter, your website came up. It seems great. I have bookmarked it in my google bookmarks to come back then. Claire Hakim Trip

Leave a Comment

Your email address will not be published. Required fields are marked *